Battery Powered Controllers
HM Battery Controller
HM Battery controllers provide a flexible solution for irrigation in horticulture and farming where no mains power is available.
Like our mains controllers, our battery controllers come with a comprehensive range of management and diagnostic features to save you time and enable you to optimise your irrigation.
- Daily event log with weekly, monthly and seasonal reports.
- The ability to send alert emails and daily volume reports to 5 nominated email accounts
- Data backup facility to restore your controller’s .
HM Controller Sizes
HM-Battery controller come in 3 sizes.
- HMB4 - 4 valves
- HMB8 - 8 valves
- HMB16 - 16 valves
Stay Connected
The HM-battery controller can be operated as standalone controllers. Or operated remotely using Heron’s webb app on any device with an internet browser.
Software Specification
- Up to 28 independent programs.
- Naming of programs, and valves
- 64 configurable automatic starts.
- Day of the week, weekend, week day, variable period,
- Up to 8 continual cycling starts.
- High and low flow limits can be set per valve.
- Valve times can be set from a minimum of 1 second to 60 hours.
- Rainfall can be monitored over 1 to 4 days, irrigation programs can be reduced by 25%, 50%, 75% or 100%.
- Fertigation facility to run fresh water followed by fertilizer and then fresh water.
- Delay between valves can be set per valve.
- Group percentage adjust and program percentage adjust.
Allocate the pump to zones or programs.
Hardware Specification
- Controller current consumption 0.5mA
- Compatible with 12V latching solenoid valves.
- Solenoid output voltage is boosted 25V to operate latching coils at a long distance
- 4 line display .
- Run up to 8 valves in parallel.
- Operate with a flow meter
- Remote start input
- One pump or master valve output (Latching relay available to make volt free contact)
- Designed to operate in an industrial environment. High electrical noise immunity.